Thought I had `cleared` the sensor on my 30D Mark but not quite and I am not sure what to do next, I am loath to mess any further.
>
Notable Recent Sightings
29/05 | Pink-footed Goose | 1, over Welshpool, photo'd on 09/06 |
01/05 | Red-throated Diver | 1, Llyn Clywedog |
07/02 | Whooper Swan | 44, Lake Vyrnwy |
31/01 | Whooper Swan | 51, Haimwood, Llandrinio |
17/11 | Firecrest | 2, Castle Caereinion |
07/11 | Barnacle Goose | 1 among Canada Geese, Llyn Coed-y-Dinas |
07/11 | Hawfinch | a few, Lake Vyrnwy, also Bramblings |
01/11 | Short-eared Owl | 1, Cefn Coch Wind-farm |
01/11 | Great Grey Shrike | Gregynog |
28/10 | Great Grey Shrike | Lake Vyrnwy, also 1 on 30th at Eunant |
25/09 | Gannet | 1 juv grounded near Caersws |
07/09 | Nightjar | 1, photographed near Pontrobert |
17/07 | Quail | RSPB Lake Vyrnwy, also heard 20/06 and 08/07 |
24/04 | Long-eared Owl | 2, RSPB Lake Vyrnwy |
16/04 | Purple Heron | 1, Cors Dyfi |
05/03 | Firecrest | 1, Lake Vyrnwy |
05/03 | Short-eared Owl | 1, Lake Vyrnwy |
14/01 | Pink-footed Goose | 1, Dolydd Hafren |
03/01 | Waxwing | 20, Meifod; also 5 Welshpool by canal on 01/01. Last: 6 Bwlch-y-Garreg 17/03 |
See Sightings Archive for older records |
Tuesday, March 13, 2012
Subscribe to:
Post Comments (Atom)
Trevor
ReplyDelete2 options are dry or wet clean - dry cleaning is something you should probably look to do regularly with something like an Arctic Butterfly (probably also need a sensor loupe as well). Dry cleaning will pick up the bits of rubbish with a static-charged brush.
Wet clean, where you have spots on the sensor glass, is a bit more of a tricky operation using pads dampened with a cleaning fluid.
As ever very easy to get all of this wrong so if not confident take it into a camera shop and they should be able to do it for you - tho make sure in your case they do both a dry clean of the chamber and wet clean of the sensor
Unfortunately every time you change a lens you run the risk of introducing contamination into the sensor chamber - if you look closely you'll probably find all sorts of weird bits of dust in the camera when you take a lens off. Also useful tip when you change a lens or clean the chamber/sensor is to do it with the camera facing down
Sorry alternative of course is to clone the dust spots out in post-processing although sooner or later you'll end up with a spot in a place you can't do much about!
ReplyDeleteIf your not confident in doing it yourself Trevor get it fixed by experts, not a local shop, cost £40 or so. Try to keep your favourite lens on at all times. A new sensor will cost you a lot of money.
ReplyDelete